MANUFACTURING
What this code covers
Use this section for mANUFACTURING when the main activity includes The output of a manufacturing process may be finished in the sense that it is ready for use or consumption, or it may be semi-finished in the sense that it is to become an input for further manufacturing. For example, the output of alumina refining is the input used in the primary production of aluminium; primary aluminium is the input to aluminium wire drawing; aluminium wire is the input for the manufacture of fabricated wire products. and Manufacture of specialised components and parts of, and accessories and attachments to machinery and equipment is, as a general rule, classified in the same class as the manufacture of the machinery and equipment for which the parts and accessories are intended. Manufacture of unspecialised components and parts of machinery and equipment (for example, engines, pistons, electric motors, electrical assemblies, valves, gears, roller bearings, is classified in the appropriate class of manufacturing, without regard to the machinery and equipment in which these items may be included.. Check exclusions and nearby codes before applying it to a mixed activity.
Official NACE Rev. 2.1 labels and explanatory notes are imported from the source dataset. Plain-language explanations are shown separately so readers can compare interpretation with the source text.
This is a top-level section with no parent code.
- This section includes the physical, mechanical, chemical or biological transformation of materials, substances, or components into new products, although this cannot be used as the single universal criterion for defining manufacturing (see remark on processing of waste below). The materials, substances, or components undergoing transformation are either raw materials or products of agriculture, forestry, fishing, mining or quarrying as well as products of other manufacturing activities. Substantial alteration, renovation or reconstruction of goods is generally considered to be manufacturing.
- The output of a manufacturing process may be finished in the sense that it is ready for use or consumption, or it may be semi-finished in the sense that it is to become an input for further manufacturing. For example, the output of alumina refining is the input used in the primary production of aluminium; primary aluminium is the input to aluminium wire drawing; aluminium wire is the input for the manufacture of fabricated wire products.
- Manufacture of specialised components and parts of, and accessories and attachments to machinery and equipment is, as a general rule, classified in the same class as the manufacture of the machinery and equipment for which the parts and accessories are intended. Manufacture of unspecialised components and parts of machinery and equipment (for example, engines, pistons, electric motors, electrical assemblies, valves, gears, roller bearings, is classified in the appropriate class of manufacturing, without regard to the machinery and equipment in which these items may be included.
- Making specialised components and accessories by moulding or extruding plastics materials is usually included in group 22.2.
- Activities primarily classified as aGRICULTURE, FORESTRY AND FISHING
- Activities primarily classified as mINING AND QUARRYING
- Activities primarily classified as eLECTRICITY, GAS, STEAM AND AIR CONDITIONING SUPPLY
- Activities primarily classified as wATER SUPPLY; SEWERAGE, WASTE MANAGEMENT AND REMEDIATION ACTIVITIES
- Compare with A, B, D when the main activity overlaps another code.
- Review the Rev. 2 to Rev. 2.1 mapping type before migrating old records.
- Check national equivalent caveats before using this code for local registration or filing workflows.
Use this guide as classification support, not legal, tax, filing, or regulatory advice.
- - This section includes the physical, mechanical, chemical or biological transformation of materials, substances, or components into new products, although this cannot be used as the single universal criterion for defining manufacturing (see remark on processing of waste below). The materials, substances, or components undergoing transformation are either raw materials or products of agriculture, forestry, fishing, mining or quarrying as well as products of other manufacturing activities. Substantial alteration, renovation or reconstruction of goods is generally considered to be manufacturing.
- - The output of a manufacturing process may be finished in the sense that it is ready for use or consumption, or it may be semi-finished in the sense that it is to become an input for further manufacturing. For example, the output of alumina refining is the input used in the primary production of aluminium; primary aluminium is the input to aluminium wire drawing; aluminium wire is the input for the manufacture of fabricated wire products.
- - Manufacture of specialised components and parts of, and accessories and attachments to machinery and equipment is, as a general rule, classified in the same class as the manufacture of the machinery and equipment for which the parts and accessories are intended. Manufacture of unspecialised components and parts of machinery and equipment (for example, engines, pistons, electric motors, electrical assemblies, valves, gears, roller bearings, is classified in the appropriate class of manufacturing, without regard to the machinery and equipment in which these items may be included.
- - Making specialised components and accessories by moulding or extruding plastics materials is usually included in group 22.2.
- - Assembly of the component parts of manufactured products is considered manufacturing. This includes the assembly of manufactured products from either self-produced or purchased components.
- - The recovery of waste, in other words, the processing of waste into secondary raw materials* is classified in group 38.2. While this may involve physical, mechanical, biological or chemical transformations, this is not considered to be a part of manufacturing activities. The primary purpose of these activities is considered to be the treatment or processing of waste and they are therefore classified in section E. However, the manufacture of new products from secondary raw materials is classified in manufacturing, even if these processes use waste as an input (for example, the production of silver from film waste is considered to be a manufacturing process).
- - Specialised maintenance and repair of industrial, commercial and similar machinery and equipment is, in general, classified in division 33. However, the repair and maintenance of computers, personal and household goods, motor vehicles and motorcycles is classified in division 95.
- - The installation of machinery and equipment, when carried out as a specialised activity, is classified in class 33.20.
- - Maintenance, repair and installation of equipment that forms an integral part of buildings or similar structures (for example, maintenance, repair and installation of escalators or of air-conditioning systems, is classified as construction in section F, if carried out at the construction site).
- - This section also contains the activities of factoryless goods producers (FGPs) in manufacturing (see introductory guidelines, paragraph xx).
- - As a general rule, the activities in the manufacturing section involve the transformation of materials into new, rebuilt and remanufactured products. Their output is a new product. As clarification, the following activities are considered manufacturing in NACE:
- - fresh fish processing (oyster shucking, fish filleting), not done on a fishing boat, see 10.20
- - milk pasteurising and bottling, see 10.51
- - leather converting, see 15.11
- - wood preserving, see 16.12
- - printing and related activities, excluding published goods, see 18.1
- - tyre retreading, see 22.11
- - ready-mixed concrete production, see 23.63
- - galvanising, electroplating, plating, etc., and other metallic or non-metallic coating of metals, see 25.51
- - heat treatment of metals, see 25.52
- - refilling of ink cartridges, see 26.20
- - refilling or recharging of fire extinguishers, see 28.29
- - rebuilding or remanufacture of machinery (e.g. automobile engines), see 29.10
- - assembly provided by a seller or blending of several products to be sold. If assembly is provided by a contractor, this activity should be classified in manufacturing.
- - Conversely, there are activities that, although sometimes involving transformation processes, are classified in other sections of NACE; in other words, they are not considered as manufacturing. They include:
- - logging, classified in section A
- - beneficiating of agricultural products, classified in section A
- - preparation of food for immediate consumption on the premises, classified in division 56
- - beneficiating of ores and other minerals, classified in section B
- - production of gaseous fuels for energy supply through a permanent network, classified in section D
- - production of compost from organic waste, classified in section E
- - assembly provided as part of a delivery or by a seller; however, if assembly is the main activity provided by a contractor, it is classified in manufacturing
- - activities of breaking bulk and redistribution in smaller lots, including packaging, repackaging, or bottling products (e.g. as liquors or chemicals); sorting and reselling of scrap; mixing paints to customer order; cutting metals to customer order; treatment not resulting in a different good, classified in section G
- - publishing and the combined activities of publishing and printing, classified in section J
- - Note: * secondary raw materials are materials and products which can be used as raw materials by simple reuse, or via recycling and recovery.
- - The output of a manufacturing process may be finished in the sense that it is ready for use or consumption, or it may be semi-finished in the sense that it is to become an input for further manufacturing. For example, the output of alumina refining is the input used in the primary production of aluminium; primary aluminium is the input to aluminium wire drawing; aluminium wire is the input for the manufacture of fabricated wire products.
- - Manufacture of specialised components and parts of, and accessories and attachments to machinery and equipment is, as a general rule, classified in the same class as the manufacture of the machinery and equipment for which the parts and accessories are intended. Manufacture of unspecialised components and parts of machinery and equipment (for example, engines, pistons, electric motors, electrical assemblies, valves, gears, roller bearings, is classified in the appropriate class of manufacturing, without regard to the machinery and equipment in which these items may be included.
- - Making specialised components and accessories by moulding or extruding plastics materials is usually included in group 22.2.
- - Assembly of the component parts of manufactured products is considered manufacturing. This includes the assembly of manufactured products from either self-produced or purchased components.
- - Activities primarily classified as aGRICULTURE, FORESTRY AND FISHING
- - Activities primarily classified as mINING AND QUARRYING
- - Activities primarily classified as eLECTRICITY, GAS, STEAM AND AIR CONDITIONING SUPPLY
- - Activities primarily classified as wATER SUPPLY; SEWERAGE, WASTE MANAGEMENT AND REMEDIATION ACTIVITIES
What is NACE C used for?
Use NACE C for manufacturing when the main activity matches this scope: Use this section for mANUFACTURING when the main activity includes The output of a manufacturing process may be finished in the sense that it is ready for use or consumption, or it may be semi-finished in the sense that it is to become an input for further manufacturing. For example, the output of alumina refining is the input used in the primary production of aluminium; primary aluminium is the input to aluminium wire drawing; aluminium wire is the input for the manufacture of fabricated wire products. and Manufacture of specialised components and parts of, and accessories and attachments to machinery and equipment is, as a general rule, classified in the same class as the manufacture of the machinery and equipment for which the parts and accessories are intended. Manufacture of unspecialised components and parts of machinery and equipment (for example, engines, pistons, electric motors, electrical assemblies, valves, gears, roller bearings, is classified in the appropriate class of manufacturing, without regard to the machinery and equipment in which these items may be included.. Check exclusions and nearby codes before applying it to a mixed activity.
What are typical examples for C?
Typical examples include The output of a manufacturing process may be finished in the sense that it is ready for use or consumption, or it may be semi-finished in the sense that it is to become an input for further manufacturing. For example, the output of alumina refining is the input used in the primary production of aluminium; primary aluminium is the input to aluminium wire drawing; aluminium wire is the input for the manufacture of fabricated wire products., Manufacture of specialised components and parts of, and accessories and attachments to machinery and equipment is, as a general rule, classified in the same class as the manufacture of the machinery and equipment for which the parts and accessories are intended. Manufacture of unspecialised components and parts of machinery and equipment (for example, engines, pistons, electric motors, electrical assemblies, valves, gears, roller bearings, is classified in the appropriate class of manufacturing, without regard to the machinery and equipment in which these items may be included., and Making specialised components and accessories by moulding or extruding plastics materials is usually included in group 22.2..
When might C not be the right code?
No separate exclusion examples are available for this record yet; compare nearby hierarchy records before final selection.
Which codes should I compare before choosing C?
Compare C with A AGRICULTURE, FORESTRY AND FISHING, B MINING AND QUARRYING, and D ELECTRICITY, GAS, STEAM AND AIR CONDITIONING SUPPLY when the activity description is ambiguous.
Use this section for aGRICULTURE, FORESTRY AND FISHING when the main activity includes Crop and animal production, hunting and related service activities and Forestry and logging. Check exclusions and nearby codes before applying it to a mixed activity.
Use this section for mINING AND QUARRYING when the main activity includes Mining and quarrying include the extraction of minerals occurring naturally as solids (coal and ores), liquids (petroleum) or gases (natural gas). Extraction can be achieved by different methods (for example, underground or surface mining, well operation, seabed mining). and Mining activities are classified into divisions, groups and classes on the basis of the principal mineral produced. Divisions 05 and 06 are concerned with mining and quarrying of fossil fuels (coal, lignite, petroleum, gas); divisions 07 and 08 concern metal ores, various minerals and quarry products.. Check exclusions and nearby codes before applying it to a mixed activity.
Use this section for eLECTRICITY, GAS, STEAM AND AIR CONDITIONING SUPPLY when the main activity includes This section therefore includes the operation of electricity and gas utilities. and The section also includes heating and cooling (for example, steam and air conditioning supply) through a permanent network.. Check exclusions and nearby codes before applying it to a mixed activity.
Use this section for wATER SUPPLY; SEWERAGE, WASTE MANAGEMENT AND REMEDIATION ACTIVITIES when the main activity includes The output of the waste or sewage treatment process can either be disposed of or become an input into other production processes. Secondary raw materials are materials and products which can be used as raw materials by simple reuse, or via recycling and recovery of waste. Activities of water supply are also grouped in this section, since they are often carried out in connection with, or by units also engaged in, the treatment of sewage. and The activities also include remediation of contaminated buildings and sites, soil, surface and groundwater (for example, oceans, mangroves, seas), and so on.. Check exclusions and nearby codes before applying it to a mixed activity.
Use this division for manufacture of food products when the main activity includes This division is organised by activities dealing with different kinds of products: meat, fish, fruits and vegetables, fats and oils, milk products, grain mill products, animal feed and other food products. Production can be carried out for own account, as well as for third parties, as in custom slaughtering. and Some activities are considered manufacturing even though there is retail sale of the products in the producers’ own shop (for example, those activities performed in bakeries, pastry shops and prepared meat shops which sell their own production). However, where the processing is minimal and does not lead to a real transformation, the unit is classified to section G.. Check exclusions and nearby codes before applying it to a mixed activity.
Use this division for manufacture of beverages when the main activity includes Manufacture of beverages. Check exclusions and nearby codes before applying it to a mixed activity.
Use this division for manufacture of tobacco products when the main activity includes Manufacture of tobacco products. Check exclusions and nearby codes before applying it to a mixed activity.
Use this division for manufacture of textiles when the main activity includes Preparation and spinning of textile fibres and Weaving of textiles. Check exclusions and nearby codes before applying it to a mixed activity.
Rev. 2 code C can map to more than one Rev. 2.1 class: A AGRICULTURE, FORESTRY AND FISHING, C MANUFACTURING, S ARTS, SPORTS AND RECREATION.
Official close match imported from NACE Rev. 2.1.
Datasets, CRM segments, KYC rules, reporting logic, and historical joins may need review because the activity scope is not a simple unchanged carry-over.
Review the official explanatory notes for each target code and confirm whether the business activity still fits the suggested Rev. 2.1 class.
Rev. 2 code E can map to more than one Rev. 2.1 class: C MANUFACTURING, E WATER SUPPLY; SEWERAGE, WASTE MANAGEMENT AND REMEDIATION ACTIVITIES.
Official close match imported from NACE Rev. 2.1.
Datasets, CRM segments, KYC rules, reporting logic, and historical joins may need review because the activity scope is not a simple unchanged carry-over.
Review the official explanatory notes for each target code and confirm whether the business activity still fits the suggested Rev. 2.1 class.
Rev. 2 code M can map to more than one Rev. 2.1 class: C MANUFACTURING, N PROFESSIONAL, SCIENTIFIC AND TECHNICAL ACTIVITIES, O ADMINISTRATIVE AND SUPPORT SERVICE ACTIVITIES.
Official close match imported from NACE Rev. 2.1.
Datasets, CRM segments, KYC rules, reporting logic, and historical joins may need review because the activity scope is not a simple unchanged carry-over.
Review the official explanatory notes for each target code and confirm whether the business activity still fits the suggested Rev. 2.1 class.
Rev. 2 code N can map to more than one Rev. 2.1 class: C MANUFACTURING, F CONSTRUCTION, G WHOLESALE AND RETAIL TRADE, H TRANSPORTATION AND STORAGE, I ACCOMMODATION AND FOOD SERVICE ACTIVITIES, K TELECOMMUNICATION, COMPUTER PROGRAMMING, CONSULTING, COMPUTING INFRASTRUCTURE AND OTHER INFORMATION SERVICE ACTIVITIES, O ADMINISTRATIVE AND SUPPORT SERVICE ACTIVITIES, Q EDUCATION, R HUMAN HEALTH AND SOCIAL WORK ACTIVITIES, S ARTS, SPORTS AND RECREATION, T OTHER SERVICE ACTIVITIES.
Official close match imported from NACE Rev. 2.1.
Datasets, CRM segments, KYC rules, reporting logic, and historical joins may need review because the activity scope is not a simple unchanged carry-over.
Review the official explanatory notes for each target code and confirm whether the business activity still fits the suggested Rev. 2.1 class.